Showing 97–106 of 106 results

 46-2017

 New product

Type RP/10 regulators are normally employed in regulating stations using high pressure gas compressed in cylinders.They can also be employed with middle pressure gas in ceramic, chemical, pharmaceutical factories for small furnaces.Type RP/10 is in conformity with the Pressure Equipment DirectivePED 2014/68-UE and is classified in Category I.

 47-2017

 New product

In monitor-regulator systems the booster valve V/31-2 is installed on the motorization pressure circuit, in order to obtain a more rapid action in monitor closing.

 48-2017

 New product

Silencers are noise reduction system devices which are commonly installed in the regulator as a remedy for noise pollution.
Type SR Silencer is fitted near the regulator shutter and is highly efficient up to a theoretical speed of 80 m/s calculated at the outlet flange. Type SRS Silencer consists of a Type SR Silencer plus a widened outlet flange in which a second silencer is fitted. Type STL Silencer is specially developed to be introduced into T couplings of piping. While Type STP Silencer, is fitted in the pipe and is secured with two flanges.

 49-2017

 New product

The automatic spring-loaded relief valves are designed to keep line pressure below preset values. They are mounted downstream of regulators and perform the specific function of releasing small amounts of gas in the event of the regulator not closing properly. V Series is in conformity with the Pressure Equipment Directive PED 97/23/EC and is classified in Max. Category I

 50-2017

 New product

VFA Series butterfly valves are wafer flangeless type and are used typically in gas reducing stations for a on-off service.VFA Series butterfly valves,thanks to their particular construction features,have very low pressure losses and excellent seal.This series of butterfly valves is designed basically for transmission and distribution grids of the natural gas and for commercial/industrial use.

Modifications and additions to the Performance Project of the Maksimir Stadium Gas Boiler Room

Conceptually solution of lp for LPD storage (V ≤ 5 m3)

Main and performance project of the main water supply pipeline Aleja Bologna - Handcuff

Development of functional scheme and operating instructions for Maksimir Stadium

2005.

Žutica

TECHNICAL DATA: Reconstruction of the existing waste pit Jaundice included: - Construction of a new reception concrete pit for liquid waste - Construction of a new pit for solid solid Waste - Reconstruction of the heating and pumping system the existing shipment of the pane - Design of the vehicle wash plateau with a catchment liquid waste pit - The solution of heating water for washing vehicles and pumps for that water - Pipelines connecting new pits with existing shafts Time je jama osposobljena za prihvat tekućeg otpada s područja Ivanić Grada i Žutica. The Main and Performance Project was built and the building was built.

Skip to content